Dixon Bayco FloTech FT208 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Монітор Dixon Bayco FloTech FT208. Dixon Bayco FloTech FT208 20 сторінок. Checkmate programmable retain / overfill onboard monitor

Друкувати сторінку

Introduction

This Manual describes the features, installation, programming, operation and troubleshooting techniques for the
FloTech FT208 CheckMate Programmable Retain / Overfill Onboard Monitor.

Monitor Features

The FloTech FT208 CheckMate Retain / Overfill Monitor has the following features:
-
Operates on 12 VDC or 24 VDC systems.
-
Monitors up to eight overfill sensors.
-
Monitors up to eight retain sensors.
-
Top Only or Top and Bottom configuration.
-
Connects to Float, Thermistor or Optic style rack.
-
Non I.S. Relay Output
1. 12 VDC, 1 AMP. MAX.
2. Permissive: Closed
3. Non-Permissive: Open
-
The monitor is field programmable.
-
Simple Wiring – no jumpers, terminators or dummies.
-
Compatible with Two Wire or Five Wire type sensors.
-

Monitor Indicators

Refer to Fig. 1.
PWR LED
Yellow LED that indicates power is connected to the monitor.
PERMIT LED
Green LED indicates to the rack the sensors are permissive.
TOP LEDs
Overfill Sensor Indicators, ON indicates a wet sensor.
BOTTOM LEDs
Retain Sensor Indicators, ON indicates a wet sensor.
OPTIC FROM RACK (THERM A) LED
FloTech Programmable CheckMate Retain / Overfill Monitor
Fig. 1 FT208 Monitor
4
10466 REV N
FT208 CheckMate