Edgewater Networks 200EW/E Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережевий маршрутизатор Edgewater Networks 200EW/E. Edgewater Networks 200EW/E 7 сторінок. Networking router
Друкувати сторінкуStep 2 − Configuring the EdgeMarc
1. The EdgeMarc device comes preconfigured with 192.168.1.1 local LAN address with a
subnet mask of 255.255.255.0. Configure your computers Ethernet adapter's IP address
to any address other than 192.168.1.1 in the same subnet mask, for example
192.168.1.10.
Note:
2. Launch a web browser on the PC and enter the following URL:
press Enter
3. The following login window should appear:
4. Enter "root" in the User name field and "default" in the Password field.
5. The System page should appear next if message of the day is not enabled. If it is then
click on the System link under "Configuration Menu".
6. From the Configuration Menu on the left, configure the following:
•
Network – To configure WAN and LAN ports
•
DHCP Server (optional) – Configure according to your specific needs.
If you're using a LAN switch, it must support 100Mbps full duplex.
http://192.168.1.1
and
Page 4 of 7