ClearView PowerBoards PB-TA-006 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари ClearView PowerBoards PB-TA-006. ClearView PowerBoards PB-TA-006 18 сторінок. Toyota landcruiser 300 series 2022-current

Друкувати сторінку

Before You Start

IMPORTANT

Clearview recommends installation of the Power Boards to be performed by a

professional as installation will require vehicle trim removal, wire routing and

electrical work. The installation should take approximately 3 hours.

CAUTION

Read through the fitting instructions before installation of Clearview Accessories.

Always install the accessory following the fitting instructions. Failure to do so may

cause damage to the vehicle or the accessory.

Ensure all recyclable discarded vehicle accessory components and packaging are

recycled following local recycling regulations.

Safely store and protect any removed vehicle components.

Remove all metal swarf and dust from all vehicle surfaces if the surface is used for

accessory installation.

BEFORE YOU START

Remove the 'L-shaped' lower battery mounting plate, then move battery

towards the front of vehicle to allow access to firewall grommet.

Remove OEM side steps, if applicable.

FOR TECHNICAL SUPPORT CALL 03 8351 9933

WARNING