ClearView RT-RT110 Інструкція з монтажу Посібник з монтажу - Сторінка 15

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари ClearView RT-RT110. ClearView RT-RT110 20 сторінок.

Друкувати сторінку

Assembly Instructions

16. Finalise all positioning and adjustments. For all conversions see Torque conversion

table on Page 6.

17. Make sure the M10 SPLIT WASHERS and M10 JAM NUTS remain loose on the M10 BALL

MOUNT CLAMP BOLTS and finish tightening the M10 CLAMP BOLTS evenly onto BALL

MOUNT. (120-180 in-lbs torque [17 mm socket or wrench]). Once the M10 BALL MOUNT

CLAMP BOLTS are tight, tighten the M10 WASHERS AND JAM NUTS securely.

Refer Image 12.

18. Tighten the large CENTER

HUB M18 ARM PIVOT BOLTS.

(1500 in-lbs torque [27mm

socket or wrench]).

Refer Image 13.

Note: Make sure the ARM

PIVOT BOLTS and SUPPORT

RODS have sufficient

clearance away from the

bumper so that they do not

rub up against it.

Flat Washer

Split Washer

Jam Nut

Ball Mount Clamp Bolt

Arm Pivot Bolts (2)

clearviewaccessories.com.au

IMAGE 12

Exploded view

Ball Mount Clamp Bolt

Hub Assembly

IMAGE 13