Edgewater Networks EdgeProtect 7300 Посібник з експлуатації обладнання - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації обладнання для Контролер Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 16 сторінок. Enterprise session border controller 7000 series
Також для Edgewater Networks EdgeProtect 7300: Посібник з встановлення обладнання (18 сторінок)
Друкувати сторінку7300 Hardware Guide
Connecting to the 7300 EdgeProtect Series for the First Time
The EdgeProtect Series appliance is shipped with a pre-configured IP address on Port 1 of 192.168.1.1
1. Connect the 3-pin female plug of the power cord into the input power socket in the system shown as (J) in the above figures and the other
end to a wall AC outlet.
2. Turn the system power on by pressing on the top part of the power switch shown as (K) in the above figures.
3. Connect a computer using an IP address of 192.168.1.2 and subnet mask of 255.255.255.0 to Port 1 shown as (G) in the above figures
with either a Ethernet switch or a Ethernet cable wired directly to the computer.
4. Launch a Web browser on the computer and enter the
configuration menu appears - enter the username root and the password default.
Configure the Network parameters as defined in the Configuration Guide contained on the EdgeProtect Documentation Library CD provided with
the system. The Configuration Guide is also available on the Edgewater Networks Web site.
http://192.168.1.1
or
https://192.168.1.1:8443
Press Return. The main
7