Altrad Belle HDC 350 Посібник оператора - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник оператора для Різак Altrad Belle HDC 350. Altrad Belle HDC 350 18 сторінок.
Друкувати сторінку
GB
The machine is tted with labels containing important information about personal safety and machine maintenance. The labels must be
in such condition that they are easy to read. New labels can be ordered from the spare parts list.
Data Plate
E
C
H
Direction of Rotation
The red sticker on the blade guard shows the direction of rotation.
Cutting Blade Speed Rating
Never use a cutting blade with a lower speed rating than the machine's. A minimum cutting blade speed rating of 4400 rpm is
recommended.
Noise Level Label
The label indicates the guaranteed noise level corresponding to EC-directive 2000/14/EC. See "Technical data" for accurate noise level.
WA
EHTMA Category
The machine is clearly marked with EHTMA categories. It is important that any power source used is in a compatible category. If any
doubt, consult an authorised supervisor.
D
B
A
G
Decals
F
A. Maximum permitted Hydraulic Oil ow
B. Machine Type
C. Maximum Relief Valve Setting
D. The warning symbol together with the book symbol means that
the user must read the safety and operating instructions before
the machine is used for the rst time.
E. Serial Number (is also stamped in the valve housing).
F. The CE symbol means that the machine is EC-approved. See
the EC declaration which is delivered with the machine for more
information.
G. Year of Manufacture.
H. Maximum Nominal Operating Pressure
6