Edgewater Networks 4300T Посібник із швидкого старту - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережевий аксесуар Edgewater Networks 4300T. Edgewater Networks 4300T 8 сторінок. Converged network appliance

Друкувати сторінку

Port Type

Firewall Ports to Open

UDP

161 (SNMP) and 162 (SNMPTRAP)

RTP

1056 to 1255

TCP

SSH TCP 22 for remote management & TCP 80 for WAN configuration-

downloads

Telnet

FTP

TCP 21 for stateful TCP-session control from

FTP server

MGCP

2427, 2429, 2432, and 2727

123

NTP

SIP

5060 and 5075

IP phones normally point to a local NTP server for their time reference. The NTP

port 123 needs to be opened if your network does not have an NTP server.

Please Note: Traffic shaping for this configuration is only available if the enterprise

data devices are also installed behind the 4300T.

4300T Web Based GUI Configurations

The web page configurations for the various 4300T deployments are shown below. The two

darker-shaded rows indicate the minimum configuration required for each deployment.

4300T

GUI Configuration

Page

Network

VoIP/ALG

NAT

Firewall

DHCP

Traffic Shaper

Traffic Simulator

System

Please visit our website at

Technical Assistance Center at 408.351.7255 for additional information or assistance.

2730 San Tomas Expressway, Suite 200, Santa Clara, California 95051

[email protected]

Suggested

4300T

Deployment

infrastructure

Yes

Optional

Yes

Optional, but

recommended

Yes

Yes (but should be

disabled if DHCP server

already exists)

Yes

Only for

Only for testing

testing

As needed

www.edgewaternetworks.com

4300T to Edgewater

4300T

with existing

existing firewall

Yes

Optional, but

recommended

Yes (but should be

disabled if DHCP server

already exists)

Optional (depends on

network topology)

Only for testing

As needed

or contact the Edgewater

, behind an