EdgeWave iPrism Посібник з експлуатації обладнання - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з експлуатації обладнання для Шлюз EdgeWave iPrism. EdgeWave iPrism 12 сторінок. Models 15h;models 25h;models 35h;models 55h; models 105h;
Також для EdgeWave iPrism: Встановлення в стійку (3 сторінок)

Друкувати сторінку

Management

interface

(LAN1)

Interface

Internal

interface

10 External

interface

Identifying the Cables

The cables shipped with your iPrism can be distinguished by holding one of the cables at each end

so the connectors are oriented the same way. The color-coding of the wires in each connector

indicates the type of cable:

•

If the colors are in the same order, it is a standard Ethernet patch cable.

•

If the colors are in a different order, it is a crossover cable. The crossover cable's package is

marked as such.

Installing the iPrism h-Series

If you are installing the iPrism in a rack, attach the brackets from the enclosed rack mounting kit

to the iPrism and mount it in a standard rack.

If you need help installing the iPrism in a rack or installing rails, see the Knowledgebase article

"Installing iPrism on a Rack" at:

www.edgewave.com/support/web_security/help_6-4/IP0474.htm .

If you are installing the iPrism on a shelf or desktop, place it on the shelf and make sure that all of

the ventilation holes on the side and back of the unit are clear.

Connect the power cable. Do not power the system on at this time.

This port provides a third auto-sensing 10/100/1000 Mbps Ethernet port

that can be used for out-of-band management of the iPrism.

Note: This is used for advanced configurations only. See the iPrism

Administration Guide for more information.

Unused

This port provides auto-sensing Ethernet connectivity to your internal

network (the network that iPrism will be filtering).

This port provides auto-sensing Ethernet connectivity to your external

network (Internet).

iPrism Hardware Guide