EdgeWave iPrism 105h Посібник з оновлення - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з оновлення для Шлюз EdgeWave iPrism 105h. EdgeWave iPrism 105h 12 сторінок. Web filter appliance upgrade guide
Також для EdgeWave iPrism 105h: Посібник із швидкого старту (4 сторінок)

Друкувати сторінку
BIOS PROCEDURE CHANGE FOR A 55H
IMPORANT:
DO NOT MAKE ANY OTHER BIOS CHANGES AS THAT WILL LIKELY CAUSE YOUR IPRISM NOT TO WORK OR NOT WORK CORRECTLY.
Enter BIOS Setup
1.
Connect a keyboard, monitor, and power cords to the iPrism.
2.
Turn on the iPrism (if it doesn't start on its own).
3.
Watch for the SuperMicro logo to appear on your monitor and then press "Delete" several times to access the Motherboard BIOS.
4.
It will take a few minutes for your iPrism to power up.
5.
Please do not enter the 3-ware RAID card BIOS.
6.
You will come up to the BIOS Setup Utility.
IPRISM 55H APPLIANCE UPGRADE GUIDE
5