DiyTracker MT-18 Посібник користувача Інструкція з монтажу та експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача Інструкція з монтажу та експлуатації для GPS DiyTracker MT-18. DiyTracker MT-18 11 сторінок. Real time gps tracking and monitoring system
Друкувати сторінкуDiagram
Wiring
Power cut relay
This connection is to remotely immobilise your bike. Please be cautious if installing
this optional immobiliser function as large currents are carried when starting the motorcycle
and we would hate for you to have an unplanned motorcycle stop due to an installation failure.
A.
Connect the Brown wire/cable to the yellow wire/cable (86) of the relay
B.
Connect the white wire/cable (85) of the relay to a constant 12/24v source
C.
Cut the positive wire of the ignition coil / fuel pump / solenoid etc
D.
Connect the green wire of the relay (30) to one end of the positive wire that you cut
E.
Connect the green wire of the relay (87a) to one end of the positive wire that you cut
WARNING
(Optional connection)
Solder and insulate all connections (Crimping should be avoided wherever possible)
All rights reserved. ©2011 DIY TRACK
Brown
87a
+12/24v
Yellow
Red
Black
Bl ue
GND
6
A
Relay
86
30
85
D
C
B
E
+12/24v
Ignition Coil
Fuel Pump
GND
Solenoid
Panic Button
86
30
87a
85
Relay