Acoustics M20 HD Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Acoustics M20 HD. Acoustics M20 HD 14 сторінок. Wireless system

Друкувати сторінку
Playing audio using Bluetooth
You can use many Bluetooth devices to play
audio through the Q M 20 system. Firstly you
will have to pair your Bluetooth device with
the speaker using the following instructions.
1. Press and hold the Bluetooth input button
on the remote control until the blue LED
flashes on the speaker. Alternatively, press
the Bluetooth button on the back of the
amplified speaker, the LED will flash blue.
2. Select the Bluetooth settings on your
device, and look for Q M 20 HD in devices.
3. Select the Q M 20 HD device in the new
Bluetooth device list.
Once connected, the LED will stop flashing
and remain on blue.
4. You can now play audio from your device.
Once you have paired a device, you can
simply connect to the Q M 20 next time which
will turn on and select the Bluetooth input.
When playing audio, you can use the device,
the remote control or the buttons on the
amplified speaker to alter the volume. You
can also use the remote control to play, pause
and skip tracks.
Clearing the Bluetooth pairing list
You can clear all the devices from the
Bluetooth pairing list memory if required by
using the following steps:
1. Put the speakers into Bluetooth pairing
mode with a long press of the BLU source
button on the remote control, the LED will
be flashing Blue.
2. Press and hold the BLU source button on
the remote control again, until the LED
goes out and then flashes three times.
The 8/uetooth pairing list is now cleared from
the memory and devices must pair again in
order to connect.
8
Playing audio using optical digital
Use a standard TOSLINK optical cable to
connect your digital audio source to the
amplified Q M 20 speaker.
•
Press the OPT button on the remote
control or press the
C
button on the
speaker until the LED is on white.
You can use the remote control or the buttons
on the amplified speaker to alter the volume.
Playing audio using analogue
•
Use the phono sockets or the 3.5mm stereo
jack socket to connect your analogue audio
source. Press the ANA button on the remote
control or press the
C
button on the speaker
until the LED
is
on green.
You can use the remote control or the buttons
on the amplified speaker to alter the volume.
Playing audio using USB
Connect a USB A-B type cable from your
computer device to the Q M 20 amplified
speaker.
•
Press the USB button on the remote
control or press the
C
button on the
speaker until the LED is on yellow.
You will then need to download the correct
USB driver from the Q Acoustics website
here:
https://desk.zoho.com/portal/
armourhomeelectronics/en/kb/qacoustics
Save the file on your computer, then follow
these instructions for Windows 1 O
1. Open 'Device manager'
2. Select
'USB2.0
High-Speed True HD
Audio'
in
'Sound,
video
and
game
controllers'
3. Select
'Driver'
and then 'Update Driver'
4. Select
'Browse
my computer for drivers, then
browse to the downloaded folder and select
5. Windows will then update the driver
6. Once finished, you can select
'SPDIF
(USB2.0 High-Speed True HD Audio)' from
the speaker selection.
7. Open your music playing application and
enjoy.
You can use the remote control or the buttons
on the amplified speaker to alter the volume.