Clearwater Spas CLEAR A-400 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для спа-центру Clearwater Spas CLEAR A-400. Clearwater Spas CLEAR A-400 20 сторінок.
Друкувати сторінкуIonizing
Ion/Action
Large Dose
"-"
"+"
Program Lock This feature will lock the controller at the currently
12 | User Guide
THE DIGITAL DISPLAY
When the "Ionizing" light is illuminating, it confirms
that the system is ionizing the water. To illuminate, the
electrodes must be fully submersed in water, and current
must be flowing from the electrodes into the water.
The more ions that are being released into the water,
the faster the light will blink. The light will look solid at
maximum dose.
This setting represents the percentage of time in each
hour the Ionizer is on for. The suggested setting follows
in the operating instructions.
Press this button to release the maximum amount of
ions for the number of hours you choose. The display
will count down the number of hours left. The system
will return to the previously set Ion/Action setting when
the large dose ends. Use this when the ionizer is first
installed, upon re-filling, or after large amounts of rain
or spillage.
This button will decrease the setting for Ion/Action or
Large Dose.
This button will increase the setting for Ion/Action or
Large Dose.
programmed settings. To lock the program, hold down
the "-" button and the "+" button simultaneously for 20
seconds. You will see "PL" (program lock) appear on the
screen. To unlock, use the same process.