Clearwater Spas TPS Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Системи фільтрації води Clearwater Spas TPS. Clearwater Spas TPS 4 сторінки. Copper/silver water ionization system

Друкувати сторінку

WATER BALANCE & MAINTENANCE:

It is very important to maintain correct water balance and maintenance habits.

Perform the required water tests as recommended, checking filters, and clean

as necessary. The use of an oxidizer will also help supplement water clarity,

and may be required for heavy bather loads.

Recommended levels for correct water balance:

pH 7.2 to 7.4

Total Alkalinity 80 to 120 ppm

Calcium Hardness 200 to 300 ppm

Copper 0.25 to 0.4 ppm

CLEANING THE ELECTRODES:

If the indicator on the control panel is not lighting or the performance of the

unit deteriorates, check the condition of the electrodes. They may become

coated with a calcium deposit. (although rare due to the Clear Balance system

as part of the TPS™) This is means they require cleaning.

To do this, unplug the unit, then disconnect the leads from the electrodes. Re-

move them from the flow cell. Stand the electrodes in about one inch of muri-

atic acid for a few minutes, or until the coating is dissolved. Remove from the

acid, and place it in a solution of sodium bicarbonate to neutralize the acid.

Rinse, reinstall in the system, and set the controller as before.

It is very important to wear protective gloves, clothing and eye wear when

working with any acids or caustic chemicals.

rev.033117