DJ'SLIGHTING DJS-LED631 Qwash LED Plus Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Світильник DJ'SLIGHTING DJS-LED631 Qwash LED Plus. DJ'SLIGHTING DJS-LED631 Qwash LED Plus 11 сторінок. 36x10w zoom moving head

Друкувати сторінку

3. Operation Instructions

-The moving head is an LED wash light for onsite decoration

purpose.

-Don't turn on the fixture if it's been through severe temperature

difference like after transportation because it might damage the light

due to the environment changes. So make sure to operate the fixture

until it is in normal temperature.

-This light should be keep away from strong shaking during any

transportation or movement.

-Don't pull up the light by only the head, or it might cause damages

to the mechanical parts.

-Don't expose the fixture in overheat, moisture or environment with

too much dust when installing it. And don't lay any power cables

on the floor. Or it might cause electronic shock to the people.

-Make sure the installation place is in good safety condition before

installing the fixture.

-Make sure to put the safety chain and check whether the screws are

screwed properly when installing the fixture.

-Make sure the lens are in good condition. It's recommended to

replace the units if there are any damages or severe scratch.

-Make sure the fixture is operated by qualified personnel who knows

the fixture before using.

-Keep the original packages if any second shipment is needed.

-Don't try to change the fixtures without any instruction by the

manufacturer or the appointed repairing agencies.

-It is not in warranty range if there are any malfunctions from not

following the user manual to operate or any illegal operation, like

shock short circuit, electronic shock, lamp broke, etc.

-3-

http://www.djslighting.com/