ARTFOX Lighting Magic 2R Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Освітлювальне обладнання ARTFOX Lighting Magic 2R. ARTFOX Lighting Magic 2R 19 сторінок.

Друкувати сторінку

3. Preparation and Connections

3.1. Safety information

The light fixtures is fitted with a number of plano-convex lenses in a highly

efficient collimator cluster. This type of lens can act as a strong magnifying

glass.

If the rays from a strong light source (such as the sun or another lighting fixture)

are directed towards the front of any of these fixtures, then internal damage

may occur. In a worst case scenario with a high power light source this can

happen very quickly, damaging the fixture internally, potentially melting

components or causing an internal fire within seconds.

In order to avoid these possible problems please adhere to the following

requirements:

1 Do not expose the front of a fixture to direct sunlight or any other strong

light sources.

2 For outdoor applications during daylight make sure that the front face of

any fixture is either shielded or points away from the sun, even when

fixtures are not in use.

3 Do not modify the front glass or lenses of any fixture.

These requirements have to be followed regardless of whether a fixture is

powered on or off as the magnifying effect is an optical effect and therefore

independent from the (electrical) state of the fixture.

Especially when working with high powered

observance of these safety instructions is mandatory.

Should you have any questions about the operation of your fixture then please contact

your local supplier, or their authorized distributor.

s ; extreme caution and