Clearwell Mobility Argent Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Clearwell Mobility Argent. Clearwell Mobility Argent 16 сторінок.

Battery Charging & Simple Maintenance

Charging Your Scooter

The charging socket is located on the

left side of the tiller head. Slide round

the protective cover and push in the

round silver plug.

CAUTION: Make sure the 3 pins line

up. Do not force the plug into the

socket and always close the protective

Charging

cover when not in use.

Socket

Battery Charger

When the charger is connected and switched on, the power lamp will indicate a steady

red. The green lamp will blink to indicate charging.

When the batteries are charged, the green lamp will change to steady green. If the

red lamp blinks there is a fault - contact Clearwell Mobility.

Always leave the charger on for a full cycle of 8-10 hours before disconnecting. This

should be done even if the charger indicates full charge.

Simple Maintenance

You should check the following before each journey:

1. Visually check the tyres for damage and their pressure. The tyres should be 35 psi all

round.

2. Check the steering moves freely.

3. The tiller clamp is tight.

4. The seat is located correctly and locked.

5. Check the armrests are tight.

6. Batteries are fully charged.

7. The front basket is secure.

Important- Possible Faults

As you get used to your vehicle you will get a feel for how it behaves. If something feels

unusual, for instance the vehicle does not accelerate or brake smoothly or the steering

feels different; contact Clearwell Mobility.

Power Overload Switch

Located under the seat is the overload switch. It acts as a resettable fuse should the

power requirement be too large. This will activate the brakes and the vehicle will stop.

Wait for a few minutes and push the button in.

@clearwellmobility

@clearwellmob