DJ-Tech Kontrol One Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання DJ-Tech Kontrol One. DJ-Tech Kontrol One 17 сторінок. Dj midi controller

Друкувати сторінку

1. Specification

MAIN FEATURES

The KONTROL ONE is USB MIDI and provides simple plug & play features working with Windows/Mac.

Jog wheel and control technology from the turntables.

KONTROL ONE's control section via USB MIDI IN/OUT.

A high resolution pulse sensor jog wheel

Pitch bending, scratching and select song.

The resistance value of the fader movement is AD converted

The DATA SEND (LED)indicated the DATA is sent/received.

The power source is selectable from USB bus-power and the exclusive power adaptor.

CONNECTION

1. POWER CONNECTOR – Plug in power adapter here.

2. POWER SWITCH (Adaptor / OFF/ USB power) – Set the switch to AC

ADAPTOR when using the exclusive AC adaptor, set to USB BUS

POWER when using power provided from the computer via USB.

3. USB PORT INPUT – Used to connect a computer.

OPERATIONS

1. Install the software normally.

2. Connect the KONTROL ONE to computer normally.

3. Open the software.

4. Start up the software to perform settings with the KONTROL ONE.

Note: The software may not recognize the KONTROL ONE if it is connected to the computer after the

software has started.

5. Operations after the system recovering from power saving mode is not guaranteed.

Note: Power save setting is required to be set OFF.

6. Many DJ software products have a MIDI LEARN function. The KONTROL ONE can control all software

that has this function.

This function is used to KONTROL ONE as controls for parameters of the software.

Note: The MIDI LEARN setting for each software is different; please refer to each software's manual

for further instructions.

7. The MIDI data created with functions can be manually set with the software, if the software does not

support the MIDI LEARN function. Please refer to the software's manual for further instructions.

8. Hold the REWIND and PLAYBYNC button, then power on; KONTROL ONE will automatically calibrate

touch pad sensitivity and show the level of sensitivity with 4 LED rings on the top. Press DOWNBEAT

button to finish calibration.

SPECIFICATION

POWER SUPPLY: DC 6V

DIMENSION: 160(W) × 289(D) × 107.5(H) mm

WEIGHT: 1.45 kg

1 2 3