EDIC-mini EM Tiny16 Plus Series Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Диктофон EDIC-mini EM Tiny16 Plus Series. EDIC-mini EM Tiny16 Plus Series 17 сторінок.
![EDIC-mini EM Tiny16 Plus Series Посібник з експлуатації](/uploads/products/server2/845840/845840.jpg)
Trouble
Symptom
Faint LED
The recorder is
is permanently
unresponsive to the
ON
user's activity
When connecting
The recorder is
the recorder
unresponsive to the
to the PC the
user's activity - the
LED is flashing
rechargeable battery
frequently
is discharged
No flash of
When disconnecting
LED on the
off the PC the
recorder after
recorder won't g to
disconnecting off
Standby Mode
the PC
10 flashes
When enabling
of LED after
recoding, the recorder
enabling
won't record
recording
Malfunction of timer Recorder's clock may fail because:
Recording starts
at the wrong time
The recorder can't be
Red and green
LEDs are not on
connected to the PC
the adapter
Trouble
Replace the battery
(for battery recorders)
Press the Reset button for 2 seconds or switch off and
then back on the recorder's power (for rechargeable
battery recorders)
Leave the recorder connected to the PC. After some
time depending on the battery discharge level the PC
will recognize a removable media and the LED will be
flashing gradually with the interval of 5 seconds.
Remove and install battery again (for the recorders with
batteries). Press the Reset button for 2-3 seconds (for
the recorders with rechargeable batteries).
Try to format the recorder in RecManager, but
remember the contents will be deleted
Synchronize the recorder's time with the PC. In
recorder settings untick «Time synchronization with the
PC». Adjust the desirable timer and make record. After
connecting to the PC verify the time on the recorder
and the PC.
Forced connection is needed: set the switch to ON
position and press reset for rechargeable battery
recorders or insert battery for battery ones. The LED
must start flashing. Shift the Switch to On position
and connect to the PC.
Possible Solution
1. Lost or switched off power
2. Recorder's time was not synchro
nized with the PC time,
3. You forcedly enabled recording.