Altronics PerformAIRE PRO Встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Встановлення для Вимірювальні прилади Altronics PerformAIRE PRO. Altronics PerformAIRE PRO 3 сторінки.

Make sure wind vane is

snapped all the way down

on assembly. If not all the

way down wind direction

reading may not function.

Overall height of assembly

is 3.5".

NOTE: If you install cups in the wrong direction you can remove them by first removing

retaining clip and then by pulling firmly and quickly STRAIGHT away from mounting tabs. DO

NOT try to bend, pry, twist, or rotate cup against mounting tabs as they can be easily broken.

***Disassembly – grasp both the cups/rotor assembly and the direction vane at the same time

and pull off together from main body!!!*** Removing the vane by itself can easily break it.

Wind Sensor Installation

3.5"