Fitel S326B Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Промислова електрика Fitel S326B. Fitel S326B 4 сторінки. Precision cleaver

If operation above does not improve the cleave quality, the blade needs to be rotated. Follow

the procedures below to rotate the blade.

1) Remove the waste bin from the main body. Loosen the

blade set screw using hexagon ranch.

2) Use a cotton swab, etc. to rotate the blade, so that the

number shown at the top of the blade increase by one

step. (Counter clock wise) The blade is positioned at

"0" by default when manufactured in factory. The next

position is "・" right after "0".

ATTENTION：Do not touch the blade directly. It is

very sharp and could cause injury.

3) Tighten the blade set screw again.

After all 24 positions are used and exhausted, the blade

must be replaced by new one at customer's expense.

Contact local service center for replacing blade service.

S326A and S326S80 has an automatic waste fiber

disposal function. To keep it operating properly, clean the

pinch roller with cotton swab soaked in alcohol after each use. After repeated use, abrasion

may form on the rubber of the pinch roller. However, the pinch roller keeps the function of

collecting optical fiber, as long as the depth of a groove is smaller than the diameter of the

fiber. When the function cannot work, even if after cleaning the pinch roller with alcohol,

contact local service to replace the pinch roller with a new one at customer's expense.（※1）.

（※1）S326B does not have pinch roller and waste bin

box.

6. Operating with ribbon fiber holder

Please remove single fiber adaptor (S326X-11) from the

main body when you use the ribbon fiber holder (Optional

parts). The fiber length from the holder edge to the

cleaved fiber tip is 13mm.

7. Contacts

Service Department:

CS2 Group

Access Network Department, FITEL Products Division

Furukawa Electric Co., Ltd.

6, Yawata-Kaigandori, Ichihara, Chiba 290-8555 JAPAN

TEL:+81-436-42-1671 FAX：+81-436-42-1786

Sales Department:

Global Sales & Marketing

Furukawa Electric Co., Ltd.

2-3, Marunouchi 2Chome, Chiyoda-ku, Tokyo 100-8322 JAPAN

TEL：+81-3-3286-32 FAX：+81-3-3286-3978

Blade set screw

Hexagonal wrench