dji M100-ZENMUSE X5 Series Посібник з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з монтажу для Дрони dji M100-ZENMUSE X5 Series. dji M100-ZENMUSE X5 Series 15 сторінок. Gimbal installation kit
Друкувати сторінку
Front Wire Outlet
Back Wire Outlet
6. Mount the new upper plate onto the center frame and tighten the 16 screws (M2.5x5). Then,
mount the new mounting rails A and B, and tighten the eight screws (M2.5x8).
Mounting Rail A
Mounting Rail B
7. Re-mount the Aircraft Status Indicator and tighten the two screws (M3x8 self-tapping). Do not
over tighten the screws to avoid damaging the threads.
DJI M100-ZENMUSE X5 Series Gimbal Installation Kit
Notch
M2.5x8
M2.5x5
Aircraft Tail
M3x8 self-tapping
Aircraft Status Indicator
©
2016 DJI. All Rights Reserved.
9