dji M200 Series Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Дрони dji M200 Series. dji M200 Series 18 сторінок.
Також для dji M200 Series: Питання (2 сторінок)

Друкувати сторінку

Troubleshooting

Should your Drop System encounter a problem which prevents

normal use, this guide may assist you in finding a solution. If

the suggested solutions do not work, or you are encountering

an issue not listed here, please contact DJI Shop Canada for

support or to arrange for a repair/replacement.

PROBLEM

Unit does not power on.

The red/green LEDs are flickering when the

unit is powered on.

The servo is twitching when the unit is

powered on.

The servo cannot fully extend or retract.

The servo does not move.

POSSIBLE SOLUTION

Check that the power switch is fully

engaged.

Check that the battery is connected

properly.

Check that the battery is fully charged.

Charge the battery.

Check that the payload pin is not

obstructed.

Check that the servo arm is not

obstructed.

Check that the battery is fully charged.

Ensure your payload is not too heavy for

the servo to move the payload pin (max

recommended weight: 2 lbs/0.9 kg.)

Check that the pin arm is not obstructed.

Check that the unit is powered on.

Check that the servo power and data

cables are not pinched or damaged.