dji Phantom 2 Vision + Посібник - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник для Дрони dji Phantom 2 Vision +. dji Phantom 2 Vision + 16 сторінок. Dronexpert gimbal
Також для dji Phantom 2 Vision +: Посібник із швидкого старту (2 сторінок), Посібник (14 сторінок), Посібник користувача (5 сторінок), Посібник (14 сторінок), Посібник користувача (5 сторінок)

IMPORTANT:

- Make sure the compass is not in line with the motor/engine of the

gimbal, it must have 'free' sight. Make sure you calibrate the

compass before your first flight after installing the gimbal! (it is

always advisable to calibrate the compass now and then).

- Make sure you have installed the dampers well, (dampers will fit in

square outcut under the plate). If dampers not placed well it might

cause jello.

- Make sure you have the flat cable on the back of the camera 'tight', the

camera will 'jitter' if the cable block the movement space of the

camera. So make sure the camera can move freely (zie page 9).

- Make sure that the connecter with the white sensor pressed all the way

through, you may have to press the connector with controlled force.

- Make sure the (jackplug) connector on the bottom is also pressed all to

the way to the end.

- If you choose to secure (thru the holes) the mount with a 'tie rip' or a

thin 'string' make sure you don't tight it to locked up, otherwise the

tie rip will pass on oscillation and can cause jello, soo loosen up the

tie rip/string (not tight).