3idee hp-eo-g9 Інструкція з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Адаптер 3idee hp-eo-g9. 3idee hp-eo-g9 5 сторінок. Vesa adapter
Також для 3idee hp-eo-g9: Інструкція з монтажу Посібник з монтажу (7 сторінок)

Друкувати сторінку

Assembly instruction

Step 1

Remove the base of your HP All-in-One PC by first pulling off

the base and then unscrewing the black plastic holder.

We have also published an assembly help video.

Step 2

Now put the 3idee VESA adapter on the metal mount and

screw it tight with the included 2 countersunk screws.

(Figure 1)

Step 3

This is how the mounted VESA adapter should look now.

Please make sure that you have tightened both screws.

(Figure 2)

Step 4

For this step we recommend a 2nd person.

Now lift the monitor and hold it to your monitor mount.

Fasten the VESA adapter with the 4 included M4x14 screws

(screw bag: SP2).

It is best to fasten 2 screws diagonally first, so that the

monitor cannot fall down and you can fasten the remaining

screws without any effort.

ATTENTION: Pay attention to the right screws!

Assembly

instructions

Figure 1

Figure 2

Figure 3