EDIFIER W806BT Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Навушники EDIFIER W806BT. EDIFIER W806BT 7 сторінок. Bluetooth stereo headphone
Друкувати сторінку
1
Audio port
2
Volume increase/next track
3
Volume decrease/previous track
4
indicator
5
Multi-function key
6
microphone
7
Recharging port
Box content :Headphoneⅹ1 3.5mm audio cableⅹ1 USB charging cableⅹ1
User manualⅹ1
■ Operation
1. Recharging
During use, when you see red light flashing, it means the battery is low and you need to recharge the
headphone.
Red light on = Charging Red light off = fully charge
Recharging time: approx 3 hours.
Tips: W806BT headphone take a special design with short micro USB connect port based on the PCBA
requirement, it is normal that the some plug part exposing out when in charging.
Warning: The rechargeable batteries providing power for the product must be
properly disposed for recycling. Do not place the batteries into fire to prevent
explosion.
2. On/Off
Function
ON
Pressand hold MFB key for about 3 seconds
OFF
Pressand hold MFB key for about 3 seconds
Pair
Pressand hold MFB key for about 5 seconds
3. Pairing
(1)
Power on the headphone, press and hold the multi-function key for about 5 seconds until red and
blue lights flash alternately, the headphone enter into pairing status.
(2)
Enable Bluetooth function on your mobile phone and search for Bluetooth devices. Select "EDIFIER
W806BT" to pair and connect. When successfully connected, the blue light of the headphone flashes
slowly and the headphone has a prompt tone.
Operation
Indicator
Blue light flashes
Red light flashes
Red and blue light flashing alternately