EDIFIER Xemai X3 Lite Посібник

Переглянути онлайн або завантажити pdf Посібник для Навушники EDIFIER Xemai X3 Lite. EDIFIER Xemai X3 Lite 7 сторінок. True wireless in-ear headphones

Друкувати сторінку

EN 1. Power ON/OFF

1. Power ON when taken out of the case.

2. Power OFF when placed in the case.

Note:

If there is no Bluetooth connection for 10 minutes after powered on, the

earbuds will power off automatically.

2. Pairing

1st Pairing

1. Taken out of the case. White and red LEDs will blink alternately.

2. Select "EDIFIER X3 Lite" in Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

Note：

For subsequent use, the earbuds will automatically connect to the device

used last time.

3. Reset

1. Taken out of the case.

2. Disconnected from any Bluetooth device. Press and hold the touch

panel on either earbud for around 8s until red LED blinks 6 times to

clear the Bluetooth pairing records and power off. If the left and right

earbuds are connected, the other side will clear the Bluetooth pairing

record and power off too.

3. Placed back in the case and taken out of the case again.

4. Select "EDIFIER X3 Lite" in Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

4. Left & Right connection

1. If there is no Bluetooth connnection and TWS connection when earbuds

are powered on, respectively tap the touch panel 5 times on both earbuds

until white LED blinks slowly to enter TWS pairing mode. Once the left

and right earbuds are connected successfully, white and red LEDs will

blink alternately to enter Bluetooth pairing mode.

2. Select "EDIFIER X3 Lite" in Bluetooth device setting to connect.

White LED will blink twice in 5 seconds when successfully.

5. Charging

Indicator

6. Controls

Left Touch Panel

Note:

1. Images are for illustrative purposes only and may differ from the

actual product.

2. Download Edifier Connect App for more customizable control settings.

For more information, please visit our website:

Model: EDF200131

P.O. Box 6264

Hong Kong

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time

to time without prior notice.

Pictures and illustrations shown on this manual may be slightly

product prevails.

White LED lit for 1s

Indicator

Earbuds

1. When hearing a low battery prompt tone, please place

the earbuds in the case for charging.

2. Red LED on earbud is steady lit when charging and

off when fully charged.

Charging Case

1. Please connect the case to power source with the

included Type-C charging cable for charging.

2. Red LED is steady lit when charging and off when

fully charged.

Note:

Please do not charge the earbuds when there is sweat or

other liquids inside the charging port, which may damage

the earbuds.

Input: 5V

200mA (Earbuds)

1A (Charging case)

Indicator

Right Touch Panel

tual