ARTHUR HOLM AH22D X216GA Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор ARTHUR HOLM AH22D X216GA. ARTHUR HOLM AH22D X216GA 14 сторінок. Hdcp compliant retractable monitors for furniture integration
Друкувати сторінку
PACKING INSTRUCTIONS
ATTENTION !
Thank you for purchasing our product, we hope you are completely satisfied with it. If you have any
questions you can contact us by email [email protected] or by phone +34 938 502
376 office hours 9am - 2pm & 3pm - 6pm GMT +1.
WARNING: To protect the product when moving place on the supplied protective foam, with screen
facing up and strapped securely to a pallet.
Protective foam
UNPACKING
1- Remove the inside protective foam piece before using the device.
(It is recommended to keep the foam which can be placed inside
again if the monitor is moved).
2- Securely mount the monitor to the table using the two mounting
brackets (included).
16
Albiral Display Solutions, s.l.
c/Fátima 25, 08512 BCN - Spain
tel. +34 938 502 376 www.arthurholm.com /www.albiral.com
8 sec.
"beep"
Power
FOAM
PACKING
3- When transporting, raise the monitor housing up. Press and hold the
front button for 8 seconds until you hear a beep.
4- Hold the hatch before lowering the monitor housing then disconnect
the power to disable beep. Now the buttons are non-operational.
5- Place the supplied protective foam.
WARNING
Do not use the unit in horizontal position. It could damage the
mechanical parts of the monitor.
Do not use force to open or close the monitor. It could damage the
mechanical parts of the monitor.
Use this device only with the supplied accessories. The use of unapproved
accessories, as a power supply unit, will invalid the warranty.
Never open the monitor. Only authorized qualified personnel should
open the monitor.
Do not scratch or rub the TFT panel surface with any kind of abrasive
substances or materials.
Do not spill any liquid into the cabinet or use the monitor near
water. If any liquid is accidentally spilled on the surface, cut
the power supply and dry it with a cloth. Don't restore the
power supply until it's completely dry.
Do not insert objects of any kind into the cabinet slots, as they may
touch dangerous voltage points, which can be harmful or fatal or may
cause electric shock, fire or equipment failure.
If the monitor or glass is broken, do not come in contact with the liquid
crystal and handle with care.
Do not cover for prolonged periods of time. Excessive temperatures can
reduce service life.
Before cleaning, always remove the power supply. Do not use any
abrasive detergent, solvents, bleaching or chlorine agents.
Do not stick any labels on the TFT panel surface.
Do not apply too much pressure to the TFT panel surface.
Handle with care when transporting. Save packaging for transporting.
17