ARTHUR HOLM DB1Twin Інструкція з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Монітор ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 сторінок.

OPTION 1

- Double-side tape or glue used can't be thicker than 0,2-0,25mm [0.008-0.01]

1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces

are touching each other in the whole length. (To make easier the adjustment the hight of the touch button can be

barely adjusted.)

2. Clean the top surface of the metal monitor housing and the

bottom surface of the Veneer.

3. Glue the Veneer. Double-side tape or glue can be used

(depending on the kind of materials are going to be jointed).

Veneer Guide (Optional)

The pressure applied

must not exceed 1 Kg

evenly distributed on

monitor surface.