dji Inspire 1 Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Квадрокоптери dji Inspire 1. dji Inspire 1 10 сторінок.
Також для dji Inspire 1: Посібник із швидкого старту (11 сторінок), Посібник користувача (20 сторінок)
Друкувати сторінку
5. Preparing the Remote Controller
Unfold the mobile device holder and the antennas.
Optimal Transmission Range
Press the button to
release the clamp.
DO NOT use other 2.4 GHz devices at the same time to avoid signal interference.
●
DO NOT operate more than 3 aircrafts within in the same area (size equivalent to a soccer field) to prevent transmission interference.
●
6. Prepare the Aircraft
Insert the battery
Power on the remote
controller and the aircraft
In Dual Remote Controller Mode, only the Master remote controller can transform the landing gear.
●
DO NOT place the aircraft on rough or sound-absorbing surfaces (e.g. carpets) when transforming the landing gear.
●
Strong
Weak
Try to keep the aircraft inside the optimal
transmission range. If the signal is weak,
adjust the antennas or fly the aircraft
closer.
Place your mobile
2
device and adjust
the clamp to
secure.
1
Connect your
mobile device with
3
a USB cable.
Unfold
Dual Remote Controllers
You will need to link the Master and Slave
remote controllers.
On the Master RC, launch the DJI GO
app and enter Camera View. Tap
the top of your screen to bring up the RC
Settings. Set the RC Status as 'Master',
and then enter the desired connection
password.
Similarly on the Slave RC, set the RC
Status to 'Slave'. Then tap Search for
Master RC and connect to the Master RC
with your preset password.
Toggle the
transformation switch
up and down at least
four times
4
X
on
Transform the
aircraft to Landing
Mode