dji Matrice 100 Посібник з техніки безпеки - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з техніки безпеки для Квадрокоптери dji Matrice 100. dji Matrice 100 20 сторінок. Intelligent flight battery
Також для dji Matrice 100: Інструкція з техніки безпеки (4 сторінок), Короткий посібник (2 сторінок)

Друкувати сторінку

dji Matrice 100 Посібник з техніки безпеки

Flight Modes, Functions and Warnings

Flight Modes

To avoid serious injury and property damage, observe the following rule:

1. Do NOT switch from P mode to either A mode or F mode unless you are sufficiently familiar with

the aircraft's behavior for each flight mode, since disabling GPS may result in being unable to land

the aircraft safely.

P mode is preferred for most flying scenarios. Users can switch to A mode where and when P mode is

unavailable. Be aware that some features are NOT available for A mode, and therefore be EXTRA cautious

when flying in A mode.

1. P mode (Positioning): P mode works best when the GPS signal is strong. There are two different states of

P mode, which will be automatically selected by the DJI Matrice 100 depending on GPS signal strength:

a. P-GPS: GPS is available, and the aircraft is using GPS for positioning.

b. P-ATTI: When GPS is not available, the aircraft is using only its barometer for positioning, so only

altitude is controlled.

2. A mode (Attitude): The GPS is NOT used for positioning. The aircraft only uses its barometer to maintain

altitude. If it is still receiving a GPS signal, the aircraft can automatically return home if the Remote

Controller signal is lost and if the Home Point has been recorded successfully.

3. F mode (Function): Intelligent Orientation Control (IOC) is activated in this mode. Ensure you are familiar

with IOC functions before use.

If you intend to switch to modes that disable GPS assistance (e.g., A mode), you are required to accept the

prompted disclaimer to enable this function. If this function is enabled, you further understand and agree

that data including but not limited to flight telemetry data and function records could be uploaded to and

maintained on a DJI designated server.

Failsafe and Return to Home

1. The Return to Home feature will NOT work if the GPS signal is insufficient or if GPS is not active.

2. Press the RTH (Return to Home) Button on the remote controller to bring the aircraft back to the Home

Point instead of turning off the remote controller.

3. Tall buildings may adversely affect the Failsafe function. Please adjust the aircraft location, altitude and

speed while returning home to avoid obstacles.

4. Make sure to always fly the aircraft within the transmission range of the remote controller.

5. When updating the Home Point, do NOT block the GPS signal of the remote controller and ensure the new

Home Point is correct on the live map.

6. Only use the Failsafe and Return to Home functions in case of emergency, as they may be affected by the

weather, the environment, or any nearby magnetic fields.

7. Do NOT update the Home Point near tall buildings, as the GPS may be blocked and lead to an incorrect

location being stored.

8. The aircraft cannot avoid obstacles during the Failsafe RTH; therefore it is important to set an appropriate