dji Matrice 100 Короткий посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий посібник для Квадрокоптери dji Matrice 100. dji Matrice 100 2 сторінки. Intelligent flight battery
Також для dji Matrice 100: Інструкція з техніки безпеки (4 сторінок), Посібник з техніки безпеки (20 сторінок)

Your M100 does not use the DJI Zenmuse X3 Gimbal with Camera

Way 1:

Connect the aircraft to the DJI N1 Assistant to update the aircraft's and battery's firmware.

Refer to Tool Page under Using the PC Assistant (P51) in the DJI Matrice 100 Use Manual

for details.

Way 2:

If you are using the DJI N1 Video Encoder, update the aircraft's and battery's firmware using

the firmware update package. Refer to the N1 Video Encoder User Manual for details.

(https://developer.dji.com/matrice-100/downloads)

Remove the propellers before upgrading the firmware to avoid injuries. Do NOT

touch the motors during the firmware upgrade.

Do NOT start the motors while upgrading the firmware.

The remote controller may become unlinked from the aircraft after the firmware

update. Re-link the remote controller and aircraft if necessary.

Confirm the update result according to the gimbal sounds. It is normal for the

aircraft to make sounds or its LEDs to flash during the update process.

Ensure that there is only one firmware package file stored on your Micro SD card.

Only storage devices that are formatted with FAT32 and exFAT file systems are

supported.

Updating the Remote Controller Firmware

The System Status bar in Camera View of the DJI GO app will flash several times if a

firmware update is available. Follow these steps to update the firmware via the DJI GO app.

Step 1- Check the Following

1. The remote controller has at least 50% battery level

2. Your mobile device is able to access the internet

3. There is at least 30 MB of free space on your mobile device

Step 2- Download and Update the Firmware

Go to the DJI GO app > Camera View > System Status bar > Overall Status. Tap

Download firmware to download and update the firmware.

If the firmware update fails, check the connection between the remote controller and your

mobile device, then retry the update. Contact DJI Support if you still have problems. (http://

www.dji.com/support)

Do NOT perform the firmware update while the aircraft is flying in the air. Only

carry out the firmware update when the aircraft is on the ground.

The remote controller may become unlinked from the aircraft after the firmware

update. Relink the remote controller and aircraft if necessary.

Ensure the internet connection of your mobile device is stable when downloading

the firmware package.