ARTHUR HOLM AHDV01 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Стелажі та підставки ARTHUR HOLM AHDV01. ARTHUR HOLM AHDV01 16 сторінок. Motorised wall mount for video conference cameras

Друкувати сторінку

Connections

Rear the equipment, do you have the connections to power and external control

the equipment

AHnet: RJ45 CAT5 connector for addressable RS422 control. There is a loop through

connector to use as signal RS422 output. You can connect up to 30 monitors on the

same RS422 bus

Termination: Active (ON) the termination ONLY on the last monitor of the RS422

bus

GPI: Monitor external contact close control. SubD9 female

1. GPI1 +

2. GPI1 –

3. GPI2 +

4. GPI2 –

5. GPI3 –

6. GPI3 +

7. N.C.

8. +12Vdc (600mA max.)

9. Ground

Use GPI1 (1:12Vdc, 2:Ground) to open the equipment

Use GPI3 (6:12Vdc, 5: Ground) to close the equipment

Changing the monitor address:

‐ Push OK. One BEEP sounds

‐ Change the monitor address using UP or DOWN buttons

‐ Push OK. Two BEEP sounds, indicating that the new address has been

saved