dji PHANTOM 4 PRO+ Посібник користувача - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник користувача для Квадрокоптери dji PHANTOM 4 PRO+. dji PHANTOM 4 PRO+ 20 сторінок.
Також для dji PHANTOM 4 PRO+: Посібник із швидкого старту (8 сторінок)

Phantom 4 Pro/Pro+ User Manual
Obstacle Avoidance During RTH
Aircraft can now sense and actively attempt to avoid obstacle during FailSafe RTH, provided that the
light condition is ideal for the Obstacle Sensing System. The details on how the aircraft will behave during
obstacle avoid is listed below:
1. Aircraft decelerates when an obstacle is sensed at 65 feet (20 meters) ahead.
2. Aircraft stops and hover then start ascending vertically to avoid the obstacle. Eventually, the aircraft will
stop climbing when it is at least 16 feet (5 meters) above the detected obstacle.
altitude.
To ensure the aircraft is heading towards the static direction, you cannot rotate the aircraft
during FailSafe RTH while Obstacle Sensing System is enabled.
The aircraft cannot avoid the obstacle that is direct above the aircraft.
TapFly
Introduction
designated direction without using the remote controller. Aircraft can automatically avoid obstacle or initiate
too bright ( > 10,000 lux).
Using TapFly
Ensure the battery level is more than 50 % for the Intelligent Flight Battery. And the aircraft is in P-mode.
Then follow the steps below to use TapFly:
ON
Auto Hold
18
©
2016 DJI. All Rights Reserved.
m
m
OFF
above 3m