dji OSMO MOBILE SE Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів dji OSMO MOBILE SE. dji OSMO MOBILE SE 18 сторінок.

Using Osmo Mobile SE

Status Panel

Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.

System Status Indicator Descriptions

Blinking Pattern

Solid yellow

Solid green

Pulses yellow or green

Blinks red and green alternately Firmware updating/firmware update failed

Solid red

Battery Level Indicator Descriptions

Blinking Pattern

Blinks red quickly

Solid red

Solid yellow

Solid green

Gimbal Mode

Follow: pan and tilt axes follow, where both the pan and tilt axes follow the movement

of the grip. Suitable for scenarios when moving up and down or on a slant.

Tilt Locked: only the pan axis follows, where only the pan axis follows the movement

of the grip. Suitable for scenarios such as arc shots or moving from left to right.

FPV: pan, tilt, and roll axes follow, where all three axes follow the movement of the

grip. Suitable for shooting the first-person view.

SpinShot: pan, tilt, and roll axes follow. The joystick can be used to control the roll axis

rotation. SpinShot enables footage to be shot while rotating the camera 360°. This is

suitable for shooting push, pull, and down.

Descriptions

Bluetooth disconnected

Bluetooth connected

Standby mode

Abnormal status detected

Battery Level

≤5%

6%-19%

20%-60%

>60%

M Button

When powered off

Press once: check the battery level

Press and hold: power on

When powered on

Press once: switch between gimbal modes

Press three times: enter standby mode (press any button to exit)

Press and hold: power off. Press and hold for 20 seconds to force

power off