FITNESS AUDIO Aerolink AL 3.0 Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Приймач FITNESS AUDIO Aerolink AL 3.0. FITNESS AUDIO Aerolink AL 3.0 3 сторінки.

Друкувати сторінку

AL 3.0 Aerolink Bluetooth® Receiver

Thank you for purchasing the Aerolink by Fitness Audio. This product is easy to install by

anyone one who is familiar with setting up sound systems. It is now available in 1 of 4 sepa-

rate IDs: Aerolink1, Aerolink2, Aerolink3 and Aerolink4. They can be identified in 3 ways - 1) A

Blue Dot on the Silver Label on the side of the carton is the first indication of the id number;

2) you will see a black number in a white circle on the right hand side of the front panel

once you have unpacked the unit; and 3) the Bluetooth Device signature for the product

when you pair it with your smartphone, pc or tablet. The 4 separate id versions can all be

used under the same roof in adjacent rooms without any conflict in pairing - you will be

pairing with the one who's number is shown on the front panel you are looking at.

1. Powering It Up.

The Aerolink can be powered from any 12V500mA already in use in the audio system like

those that power the Wireless Mic Receiver using the DC "Y" Cable supplied. Alternatively, if

you purchased the unit with an optional 12V DC Power Supply then please plug that into a

GPO and DC connector into the Power In socket (1).

2. Connecting to a Mixer.

Connect using either the Stereo (TRS) Line Out Jack (3) or the 2 RCA sockets(2) to your mix-

er's matching Line Input sockets. A standard 2RCA to 2RCA Cable is provided.

3. Turn it on and linking up.

When you turn it on, the blue Power-on light in the switch illuminates and the 2 blue LEDs

will start flashing once you have pushed the Blue LINK button (6). The first, "SCAN" LED(4) is

searching for a smartphone or player to pair with, so, open your smartphone, go to Settings,

select Bluetooth, turn Bluetooth on and watch it search for devices. After a few seconds the

words Aerolink1 will appear and Not Connected will soon change to Connected and the

SCAN LED will stop flashing. The second, "LOCK LED"(5) will continue to flash confirming the

link is good. Go to your music file on the device and select the Playlist you want to use and

press Play. If the sound system is turned on and the Aerolink has been selected then you will

hear the music so set the volume and you are all done. Please note that the Volume Control

(7) on the front Panel of the Aerolink is a "Turn Down" Attenuator so should always be on

MAX unless a better cleaner sound with the Mixer or Amp input you are using is achieved

with it set at the 12 o'clock position.

4. Re-setting the Link

Once you take the linked device out of the range of the receiver (around 8 meters or 25 feet)

you will need to re-scan and connect again. Press the Blue Button to break a link and to start

a new linking process again.

Key To Illustration:

1. DC Input

2. RCA Outputs

3. ¼" Stereo Jack Output

4. SCAN LED

5. LOCK LED

6. LINK button

7. ID Number

8. Volume Control

DC IN

12V

AUX OUT

LINE OUT