dji RONIN 2 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Аксесуари для фотоапаратів dji RONIN 2. dji RONIN 2 19 сторінок. Counterweight set
Також для dji RONIN 2: Посібник користувача (6 сторінок), Посібник користувача (4 сторінок), Посібник користувача (5 сторінок), Посібник (4 сторінок), Посібник користувача (6 сторінок)
Друкувати сторінку
D. Slide the camera
into the mounting plate until the safety lock engages, then lock the lever
1
E. Attach the upper crossbar and tighten the securing knob
2
The roll axis arm can be extended if there isn't sufficient mounting space for a large camera. Loosen the screws
on both sides of the roll axis to pull out the arm.
Before balancing the camera, connect the SDI cable and the camera's power cable, and install a Focus system.
Balancing
A. Balancing the Vertical Tilt
a. Unlock the tilt axis. Rotate the tilt axis so that the camera lens is pointing up.
b. Push up on the side levers
turning the adjustment knob
tilting up or down.
c. Tighten the levers
B. Balancing Depth for the Tilt Axis
a. Rotate the tilt axis so that the camera lens is pointing forward.
b. Toggle the lever
1
camera's balance by turning the adjusting knob
45 degrees upwards or downwards.
c. Tighten the securing knob
d. Lock the tilt axis.
2
1
1
to their unlocked position. Then adjust the camera's balance by
1
. Make adjustments until the camera appears balanced without
2
.
3
1
to the unlocked position and then loosen the top securing knob
and toggle the lever
4
RONIN 2
to the camera, then lock the levers
3
2
until the camera remains still when rotating the tilt axis
3
to the lock position.
5
3
©
2017 DJI OSMO All Rights Reserved.
Quick Start Guide
.
2
.
4
3
4
3
. Adjust the
2
4
5
5