dji Aeroscope AS-F1800 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для дронів та квадрокоптерів dji Aeroscope AS-F1800. dji Aeroscope AS-F1800 16 сторінок.
Також для dji Aeroscope AS-F1800: Посібник користувача (19 сторінок)
Друкувати сторінку
Aeroscope AS-F1800
Indicators
LED1
LED2
LED3
LED1: Processor module status indicator
It is used to indicate the processor's working status.
Indicator
Green blinking
Yellow blinking
Red blinking
Solid on/off
LED2: Network connection status indicator
It is used to indicate the connection status between the processor and server.
Indicator
Solid green
Solid red
LED3: UAV information capture indicator
When the Aeroscope receives UAV information, it can indicate the number of UAVs in the
area.***
Indicator
Green blinking
Off
*** The UAV number is the reported number from the background. The same UAV serial
number in a short time is regarded as one.
©
4
2018 DJI All Rights Reserved.
LED4
LED5
LED6
Description
Functioning normally or firmware updated successfully.
Checking consistency when powered on or updating firmware.
Firmware update failed.
Functioning abnormally.
Description
Connected normally and communicating with the monitor.
Disconnected from the monitor.
Description
UAV detected, green LED blinking indicates UAV information
reception.
No UAV information received.
LED1: Processor module status indicator
LED2: Network connection status indicator
LED3: UAV information capture indicator
LED4: Type 3 receiver status indicator
LED5: Type 2 receiver status indicator
LED6: Type 1 receiver status indicator