dji OSMO ACTION Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування dji OSMO ACTION. dji OSMO ACTION 16 сторінок. Bluetooth remote controller
Також для dji OSMO ACTION: Питання (4 сторінок), Посібник із швидкого старту (9 сторінок), Посібник користувача (20 сторінок)

Друкувати сторінку

Shooting Mode

Settings

Dewarp, Format, White Balance, ISO Max, Anti-Flicker, Grid, Overexposure Alert, and

Timelapse

Histogram

Slow Motion

Video Format, White Balance, ISO Max, Color, Grid, Overexposure Alert, and Histogram

HDR Video

Dewarp, Video Format, White Balance, Grid, Overexposure Alert, and Histogram

Dewarp, RockSteady*, Video Format, White Balance, ISO Max, Color, Anti-Flicker, Grid,

Video

Overexposure Alert, and Histogram

Dewarp, Photo Format, Photo Ratio, Metering, White Balance, ISO Max, Color, Anti-

Photo

Flicker, Grid, Overexposure Alert, and Histogram

* RockSteady requires a firmware update.

General Settings: Device Management, SD Card Capacity, Format SD Card, Screen Flip, Noise

Reduction, Voice Control, Voice Language, Command List, Wi-Fi Settings, Switch Wi-Fi Frequency,

Firmware Version, and About.

11. Camera Settings

Shooting Mode

Settings

Timelapse

Resolution and FPS, Video Frame Rate, ISO, Shutter, and EV

Slow Motion

Resolution and FPS, Speed, ISO, Shutter, and EV

HDR Video

Resolution and FPS and Video Frame Rate

Video

Resolution and FPS, Video Frame Rate, ISO, Shutter, and EV

Photo

AEB, Single Shot, Burst, Timed, ISO, Shutter, and EV

Updating Firmware

The firmware of Osmo Action can be updated by using DJI Mimo or a microSD card.

Using DJI Mimo

An alert appears in DJI Mimo when new firmware is available. Follow the instructions to update the

firmware.

Using a microSD Card

Download the latest firmware on the official DJI website to the root directory of a microSD card.

1. Insert the microSD card and power on Osmo Action. The update starts automatically once a new

firmware is detected.

2. During the update, the status LED indicators blink red and green alternatively and a reminder will

remain on the screen. No operation is required.

3. Osmo Action restarts automatically once the update is complete.

A microSD card is required to update firmware.

Make sure the battery level of Osmo Action is at least 15% before updating firmware.

OSMO ACTION User Manual