dji AVATA Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій dji AVATA. dji AVATA 15 сторінок. Battery charging hub
Також для dji AVATA: Посібник із швидкого старту (4 сторінок)

Друкувати сторінку

Battery Ports

电池接口

電池連接埠

배터리 포트

Akkuschacht

Puertos para

las baterías

Ports de

batterie

Vani batterie

Accupoorten

Entradas da

bateria

Disclaimer

Carefully read this entire document and all safety and

compliance guidelines provided before use.

Warnings

1. When using the charging hub to charge the Intelligent

Flight Batteries, it is recommended to use the DJI 65W

Portable Charger or a USB Power Delivery charger.

2. The charging hub is only compatible with the BWX169-

2420-14.76 Intelligent Flight Battery. DO NOT use the

charging hub with other battery models.

3. Place the charging hub on a flat and sturdy surface when

in use. Make sure the device is properly insulated to

prevent fire hazards.

4. DO NOT cover the battery or charging hub when

charging. Otherwise, heat dissipation will be affected.

5. DO NOT touch the metal terminals on the charging hub.

6. If there is any noticeable buildup on the metal terminals,

clean with a dry cloth.

Usage

When used with a compatible charger, the DJI AVATA

Battery Charging Hub can charge up to four Intelligent Flight

Batteries in sequence from a high to low power level.

1. As shown in the figure, insert the battery into the battery

port on the charging hub and connect the charging hub

to a power outlet (100-240V, 50/60 Hz) using a compatible

charger. The figure uses the DJI 65W Portable Charger as

an example.

Status LED

状态指示灯

상태 LED

Status-LED

Led de

estado

LED d'état

LED di stato

Statusled

LED de

status

Power Port (USB-C)

电源接口（USB-C）

電源連接埠（USB-C）

전원 포트 (USB-C)

Stromanschluss (USB-C)

Puerto de alimentación

(USB-C)

Port d'alimentation

(USB-C)

Porta di alimentazione

(USB-C)

Voedingspoort (USB-C)

Entrada de alimentação

(USB-C)