dji IN2BS Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій dji IN2BS. dji IN2BS 7 сторінок. Battery station for tb50

Друкувати сторінку

Disclaimer

Thank you for purchasing the Battery Station (For TB50). Read this disclaimer carefully before

using this product. By using this product, you hereby agree to this disclaimer and signify that

you have read it fully. Please use this product in strict accordance with the document and

be sure to pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. And its affiliated

companies assume no liability for damage(s) or injuries incurred directly or indirectly from

improper use of this product. Misuse includes, but is not limited to, using unapproved chargers,

charging unapproved batteries, short-circuiting, overheating, modifying the product, or touching

the terminals with skin or metal. Refer to the Safety Guidelines and Disclaimer, Intelligent Flight

Battery Safety Guidelines, and User Manual for applicable information not herein contained.

DJI

is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated

companies. Names of products, brands, etc., appearing in this document are trademarks

or registered trademarks of their respective owner companies. This product and document

reproduced in any form without the prior written consent or authorization of DJI.

This disclaimer is produced in various languages. In the event of divergence among different

versions, the Chinese version shall prevail when the product in question is purchased in China, and

the English version shall prevail when the product in question is purchased in any other region.

Warnings

1. Keep any liquids (oil, water etc.) away from the inside of the Battery Station.

2. DO NOT close the Battery Station during charging or discharging, and ensure it is well

ventilated and able to dissipate heat.

3. The Battery Station is only compatible with the TB50 Intelligent Battery, GL6D10A/GL800A

Remote Controller and WB37-4920mAh-7.6V Intelligent Battery (need to connect with WCH2

Charging Hub). DO NOT attempt to use the Battery Station with any other battery models.

4. Place the Battery Station on a flat and stable surface when in use. Ensure the device is

properly insulated to prevent fire hazards.

5. DO NOT touch the metal terminals on the Battery Station. If there is any noticeable debris

buildup, wipe the metal terminals with a clean, dry cloth.

6. Take care to avoid injuring fingers when opening or closing the Battery Station, or using the

retractable trolley handle.

7. Place the batteries in the specified directions.

8. Air pressure in the Battery Station may change during air transportation or after extreme

barometric pressure changes. The pressure valve knob on the side of the Battery Station will

balance the air pressure automatically.

Introduction

Featuring multiple battery ports, the Battery Station can charge/discharge up to four TB50

Intelligent Battery pairs (eight batteries). There are Normal and Quick modes for charging, Normal

mode charges all inserted batteries simultaneously, and Quick mode charges the pair of batteries

with the highest total charge first. Batteries can be discharged to a power level of about 25% or

50% for transportation or storage. Using the remote controller port or the USB port, the Battery

Station can also provide power to the INSPIRE

controller or mobile devices such as smartphones or tablets.

The Battery Station can hold up 12 TB50 Intelligent Batteries, two WB37-4920mAh-7.6V

Intelligent Batteries and a WCH2 Charging Hub. Integrated wheels make the Battery Station easy

to maneuver.

2 / RONIN

2 / MATRICE

200 series remote