dji ROBOMASTER Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій dji ROBOMASTER. dji ROBOMASTER 5 сторінок. Dart trigger device
Також для dji ROBOMASTER: Посібник користувача (6 сторінок), Посібник користувача (15 сторінок)

Друкувати сторінку

1. The slot structure is not included and must be provided by the user. Make sure that the

mounted UV light panel covers the standby projectile next to the launching projectile.

2. Mount the UV light panel to the slot structure. If the slot structure is metallic, make sure

to maximize the surface area that is in contact with the light panel as much as possible

and that the screw is tightly fastened to allow for optimal conduction. If the slot structure

is non-metallic, make sure it is properly mounted with heat sinks. Note that non-metallic

slot structures may melt at high temperatures.

3. Connect the UV light panel with the LED driver and then connect the XT30 port with the

power supply.

[1]

[1] Diagram of Slot

[2] Heat Sink

Connection

[3]

[4]

[3]

[2]

[3] UV Light Panel

[4] Standby Projectile

[2]

[4]

[5]

[5] Launching Projectile

[1]

[1] XT30 Port

[2] LED Driver

[3] Heat Sink

[4] UV Light Panel