AIMS Power PWRI300012120S Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Силовий індуктор AIMS Power PWRI300012120S. AIMS Power PWRI300012120S 6 сторінок. Dc to ac pure sine power inverter
Також для AIMS Power PWRI300012120S: Інструкція з експлуатації (10 сторінок)

Друкувати сторінку
AIMS Power PWRI300012120S Посібник користувача
Power
switch
2) Rear panel:
3) Remote control box (not included)
Remote control interface
4. ASSEMBLE
1. Location
First ensure that there is enough space to install the inverter, while the installation
location must meet the following requirements:
(1) Dryness: Avoid dripping water or other liquids on the inverter.
(2) Coolness: The operating temperature for the product is 32-104°F, the preferable
temperature is 50-77°F, the lower temperature is better within this range.
(3) Ventilation: There should be a certain distance between inverter and other objects,
to avoid blocking the product's vents. Allow 2 inches from openings.
2.
GFCI socket
AC output terminal
(only for PWRI300012120S )
(4) Cleanness: Do not install the product around dust, wood chips or other particles.
When the cooling fan turns on, the particles will be sucked into the inverter , thus
increasing internal temperature.
(5) When connecting inverters and batteries, it will produce arcs or sparks, so there
should not be flammable objects around, such as gasoline, alcohol, etc.
2. Mounting instructions
Mount on a solid platform because of the heavy weight, such as floor, table or stable
support. In order to avoid sliding off, the platform should bear the weight of the product,
and it is better to attach the product with four screws.
7
7 / "
8
11
8 / "
16
PWRI200012120S
3. Mounting the remote control box (Optional equipment)
1
1
3 / "
3 / "
16
16
5
5
1
1
1 / "
1 / "
2 / "
2 / "
16
16
16
16
5
5
2 / "
2 / "
16
16
1) the remote is designed to be mounted on a dash or other surface where a hole should
be cut so that it sits flush. This is not a requirement however just a recommendation.
2) The remote cable should be plugged into inverter and the remote before mounted.
Note: Optional remote is not needed for inverter operation. The main power switch will
work the power on / off.
13
11 / "
16
11
8 / "
16
PWRI300012120S
3.