Artillery Sidewinder-X1 Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для 3D-принтери Artillery Sidewinder-X1. Artillery Sidewinder-X1 2 сторінки.

EVNOVO 3D Printer

SW-X1

Step 2

Fix the spool holder to the top of the printer, adjust

the width to ﬁt the size of your ﬁlament spool.

Make

sure the ﬁlament sensor is facing

forward.

Front

List 1

Step 3

Connect the ﬁlament runout sensor as shown in

pictures below:

List 2

M4x45 (5pcs)

Step 4

Fix the Z Endstop to the frame as shown in pictures

below.

The distance between the sensor top and base

top should be approx 75mm.

75mm

Step 1

Fix the XZ gantry to the base with 4pcs of M4x45

screws as shown in picture。

M4x45 (4pcs)

Step 5

Connect the Z Stepper Motors as shown in picture

belows: