Artillian 1RMBCH Посібник з встановлення та експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Аксесуари Artillian 1RMBCH. Artillian 1RMBCH 6 сторінок.

SET-UP (cont'd.)

4. Install the adjustable length E-track cam-buckle

strap in the desired E-track slot location. Route the

strap around the front of the cooler as shown in fig.

Note: If you have chosen to use one of the alternate E-track

slots, route the strap accordingly.

5. Install the adjustable end of strap into the fixed

end's cam buckle and tighten strap down. Once

fully tightened, cut the excess strap (if desired)

using a pair of scissors.

CAUTION:

Remove the beverage cooler from the beverage

cooler holder prior to the next step.

6. Once the strap is cut to length, use a heat gun or

lighter to singe the cut end of the strap to make

sure that the strap does not fray. See fig. 6.

Note: One E-track cam-buckle strap is provided in the

kit. However, the mount was designed with many E-

track and bungee cord slots to allow the user the option

to add more straps or bungee cords, as desired.

SET-UP

Hold-down strap

Fig. 4

(install adjustable length hold-down strap end)

Fig. 6

(cut adjustable length hold-down strap end)

3 of 6

Cut and singe