Altronix HubWay162D Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Altronix HubWay162D. Altronix HubWay162D 8 сторінок. Passive utp transceiver hub with integral camera power
Також для Altronix HubWay162D: Посібник з монтажу (9 сторінок), Посібник з монтажу (8 сторінок)

Друкувати сторінку
Altronix HubWay162D Посібник з монтажу
Rack Mount Installation
1.
Remove factory installed screws from both sides of the rack chassis (Fig. 6a) .
2.
Install mounting brackets (A) on the left and right side of rack chassis using the
two (2) flat head screws (B) (included) (Fig. 6b) .
3.
Place unit into desired EIA 19" rack position and secure with mounting screws (not included) (Fig. 6c).
Fig. 6
Fig. 6a
Top
Front
Left
Remove
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Wall Mount Installation
1.
Install mounting brackets (A) on the left and right side of rack chassis using
two (2) flat head screws (B) (included) (Fig. 7a) .
2.
Place unit at desired location and secure with mounting screws (not included) (Fig. 7b).
Caution: It is necessary to make sure mounting screws are securely fastened to a beam when installing.
Fig. 7
B
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shelf Installation
1.
Position and affix rubber pads (C) (included) at
each corner on the bottom of the unit (Fig. 8) .
2.
Place unit in desired location.
Fig. 8
C
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IIHubWay8D/HubWay16D
- 8 -
Mounting Options:
Fig. 7a
A
Left Side
Rubber Pad
Fig. 6b
Top
B
A
Mounting Hardware (Included):
K18U
Front
Left
Fig. 7b
A
Two (2) mounting brackets
Six (6) flat head screws
B
for mounting brackets.
C
Four (4) rubber pads.
HubWay8D / HubWay16D Installation Guide
Fig. 6c
Top
Front Left
MEMBER