Custom Crimp CC200 Посібник оператора - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник оператора для Обтискний інструмент Custom Crimp CC200. Custom Crimp CC200 18 сторінок. Dial micrometer style adjustment
Також для Custom Crimp CC200: Посібник оператора (17 сторінок)

Друкувати сторінку
AccuStop
COUPLING STOP SET UP
TM
The AccuStop
coupling stop eliminates guesswork
TM
allowing the operator to visually observe exactly where
the crimp will be positioned on the fitting without the
need for trial and error and product scrap due to poor
crimp positioning.
With the Coupling Stop retracted, load the appropriate
set of dies and set crimp diameters as required.
With the crimper in the MANUAL mode, bring the dies
to a fully closed position.
Loosen the Coupling Stop Clamp
and position the Coupling Stop
against the back face of the dies.
Position the fitting against the Cou-
pling Stop and actuate the crimper
in the normal manner.
8
Innovating SMART Hose Assembly Solutions Since 1979
Slide the Coupling Stop Guide
against the Coupling Stop Arm.
The dimension from the face of the
fitting to the crimp position will now
be the dimension established in the
previous step.
Coupling Stop
Coupling Stop
Clamp
Coupling
Stop Guide
Hold the fitting against the Coupling
Stop Arm withdraw the Coupling Stop
Rod such that the Guide is aligned
with the desired crimp position. Lock
the Coupling Stop Clamp.