djpower TOPCAT CAT-2 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Портативний генератор djpower TOPCAT CAT-2. djpower TOPCAT CAT-2 13 сторінок.

4.2

DMX Linking

You can link the CAT-2 to a DMX controller using a 3- or 5-pin DMX connection. If using other DMX-compatible products with this

product, you can control each individually with a single DMX controller. Instructions for connecting and configuring this product for DMX

operation are in the User Manual.

4.3

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Note: Use CO2 or N2 gas only.

4.3.1

Orientation

For safety reasons, we do not recommend mounting the product in any capacity. Operate the product while it is flat in a safety position, and

make sure there is adequate room for ventilation, configuration, and maintenance.

4.3.2

Rigging

DJPOWER recommends using the following general guidelines when mounting this product.

•

Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming

purposes.

•

Make sure that the structure or surface onto which you are mounting the product can support the product's weight (see the Technical

Specifications).

•

When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.

•

When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated

platform or a truss.

OPERATION

5.1

Preparing for Operation

•

After checking that all the parts are intact and complete, position the machine on flat.

•

Fill the DJPOWER neutral fluid PRO-GX into the fluid tank.

•

The gas only can be CO2 or N2 when the unit is connected to gas cylinder.

•

Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.

•

Turn on the machine, it will immediately start heating up.