Custom Dynamics CD-LR-06-R Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Автомобільні аксесуари Custom Dynamics CD-LR-06-R. Custom Dynamics CD-LR-06-R 2 сторінки. Luggage rack / upright sissy bar led light bar
Друкувати сторінку
Installation Continued:
10. Locate the factory rear lighting wiring harness under the
seat.
11. Using the provided Posi-Tap™ connectors, connected the
Red, Yellow, and Black wires from the LED Light Bar to
the motorcycle's rear lighting circuits. Refer to wiring
diagram.
Note: If installing this product with a Magic Strobes™ Brake
Light Flasher, the LED Light Bar connections should be con-
nected down stream of the Magic Strobes™ module to ena-
ble brake flashing on the LED Light Bar.
12. Use provided wire clips and tie wraps to secure the LED
Light Bar wires from becoming cut, frayed, or pinched.
13. Reconnect the negative battery cable to the negative of
the battery.
14. Install motorcycle seat.
15. Test operation of all lighting before riding.
Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Installation Instructions - Page 2
Wiring Diagram
Black = Ground
Yellow = Low (Running)
Red = High (Brake)
Connection Points
Ground (Black)
Running (Blue)
Brake ( Red or Blue/Red Stripe)
03-2019