Custom Dynamics TruFlex TF55 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари Custom Dynamics TruFlex TF55. Custom Dynamics TruFlex TF55 6 сторінок.

Installation Instructions - Page 5
TruFLEX® Dual Color Amber/Red LEDs, in smoked tube
Part Numbers:
TFDC5S
TFDC10S
TFDC15S
TFDC20S
TFDC25S
= Connection Points
Black = Left LED Grounds
Yellow = Left Turn LEDs
Red = Left Red LEDs
Orange = Left
Low Running
TFC
Dual
Converter
TruFLEX® Dual Color 2 Section 50/50 split Amber/Red (Run/Brake/Turn)
Left Turn Brake
Part Numbers:
Orange = Running Low intensity
Questions? Call us at: 1 (800) 382-1388
Dual Color Technology - Hi Contrast Amber LEDs over-
ride the Red when Vehicle Turn Signal is engaged.
Use weatherproof splice connectors or Posi-taps™ for
TFDC30S
connections or solder wire connections.
TFDC35S
TFDC40S
Make sure to insulate solder connections with heat
TFDC75S
shrink tubing or electrical tape.
*Diagram Shows wiring as Run/Brake/Turn with TFC Dual Converter.
*2 Units are required for left and right turns.
*For Single function on Brake, Omit the Dual Converter. Cap any unused
wires to prevent shorting.
2 Section
Amber/Red
TFDC50S
TFDC70S
TFDC90S
TFDC110S
Note: Only (1) dual converter
required for these parts.
Black = Right LED Grounds
Yellow = Right Turn LEDs
Right Turn Brake
Use weatherproof splice connectors
or Posi-taps™ for connections or
solder wire connections.
Make sure to insulate solder con-
nections with heat shrink tubing or
electrical tape.
*For Single function on Brake, Omit the
Dual Converter. Cap any unused wires to
prevent shorting.
TFC
Dual
Converter
Red = Vehicle Brake
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
Red = Right Red LEDs
Orange = Left
Low Running
= Connection Points
07-2017