Custom Dynamics Magic Zone Інструкція з монтажу Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Пульт дистанційного керування Custom Dynamics Magic Zone. Custom Dynamics Magic Zone 7 сторінок. Bluetooth command remote

Друкувати сторінку

Bluetooth Control Interface Functions

Scan: Tap the Scan button to Sync the Interface with the

receiver via Bluetooth. Select the device in the list, tap to con-

firm. The Phone should give confirmation it is connected.

Note: If the app has trouble connecting or does not show

CCM5-BT available in the list of devices, try rebooting the

phone, then double check that Bluetooth function is enabled.

OK: Tap to confirm Bluetooth selection or when prompted

by the Application.

Disconnect: When this is tapped, connection between the

interface and the receiver is turned off. This should be per-

formed when the system is turned off and the application will

not be used.

On: Tap anywhere in the button area and the lighting sys-

tem comes on in the default F1 single color program. When

power is turned on, this button will be red.

Off: Tap anywhere in the button area and the lighting sys-

tem will turn off.

Zone 1 Slider: Controls the amount of power to the LEDs

assigned to zone 1. The Scale from left to right is 0-100 %.

Touch the Logo button within the slider area to adjust the inten-

sity of the color. The Slider function is available in F1-F3 pro-

grams.

Zone 2 Slider: Controls the amount of power to the LEDs

assigned to zone 2. The Scale from left to right is 0-100 %.

Touch the Logo button within the slider area to adjust the inten-

sity of the color. The Slider function is available in F1-F3 pro-

grams.

Zone 3 Slider: Controls the amount of power to the LEDs assigned to zone 3. The Scale from left to right is 0-100 %. Touch

the Logo button within the slider area to adjust the intensity of the color. The Slider function is available in F1-F3 programs.

Dim Slider: Controls the amount of overall intensity of the LEDs within all three zones simultaneously. The Scale from left

to right is 0-100 %. Touch the logo button within the slider area to adjust the overall brightness.

10. Speed Slider: Controls the speed of the zone transition as well as the speed of the strobe patterns. The Scale from left to

right is 0-100 %. Touch the logo button within the slider area to adjust the speed of strobe or zone transition.

11. F1—Function 1 (Zone control Mode): This is the default program when the interface is turned on. Each Zone will come on

full intensity at 100%. Adjust the Zone sliders to adjust individual zone intensity.

-Dim slider allows all 3 zones to adjust intensity simultaneously.

-Speed slider does not control anything in the F1 mode.

12. F2—Function 2 (Strobe Mode): Adds a strobe to the Solid color zones selected in F1. Allows each zone slider to be adjust-

ed during strobe operation.

-Dim slider also works to dim the brightness of all zones a one time.

-Speed slider works to slow the timing of the strobe function.

13. F3– Function 3 (Zone Breathe Mode): Adds a breathe function to the solid color zones selected in F1. Allows each zone slider to

be adjusted during breathe operation.

-Dim slider also work to dim the brightness of all zones at one time.

-Speed slider works to slow the timing of the breath function.

F3 Note: In F3 mode, with the speed slider at 100%, adjusting the zone sliders 1,2 or 3 will create a custom breath cycle. The differ-

ent values in each zone, creates different breathe durations. The speed slider can then be used to change the pattern even further.

Questions? Call us at: 1 (800) 382-1388

Installation Instructions - Page 6

M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST

Zone

Zone 1

Zone 2

Zone 3

12 13

05-2016SM